KWC MAC 11 CO2 NBB Steel BB Gun

SKU: KWCKM-55HN
In Stock
$ 59.99


Total:

Type: BB Pistol
Manufacturer:
KWC
Model:
MAC-11
Materials:
Full ABS plastic
Weight:
544.31 g (1.2 lbs)
Barrel:
228.6 mm (9 in), smoothbore
Power Source: 12 g CO2 x 1
Action:
Semi-automatic, double-action only
Ammo Type:
4.5 mm steel BBs
Ammo Capacity:
39 rounds
FPS:
394

Buy the magazine: KWCKW170

Trigger Pull: The trigger pull on the KWC MAC-11 M11 is double-action only and is rather long. It's a bit firm so you will get a bit of a finger workout. There is no blowback operation so this is a double-action only pistol.

Accuracy: The KWC M11 has an internal fixed hop-up system which did seem to help out a lot with accuracy. Shooting from a semi-rested position with paper targets set up 30 feet away, I was able to get well-centered 1.5 to 2 inch groupings from both versions of the KWC Mac-11 Guns. The KWC M11 was well-centered left to right but just a little high.

Build Quality: Overall, the KWC Mac 11 M11 CO2 BB Gun is built fairly well as long as you don't mind the all-plastic build. If you were to drop this all-plastic pistol on the ground it would most likely bounce a couple of times no worse for wear since it is lightweight. If it was an almost all-metal build it would weigh a lot more and dropping it onto a hard surface could easily break the zinc alloy metal parts. There is some metal on the pistol with the sliding stock and some internal parts. The rear fold out portion of the stock is actually hardened steel!

Realism: As real steel MAC-11 replica, the KWC MAC-11 M11 CO2 BB Gun looks bang on. It is a 1 to 1 scale and is virtually identical to the real MAC-11. In terms of function however, the KWC M11 BB Gun does not have many working parts other than the trigger, safety, and magazine release. The selector switch, bolt charging handle, and bolt are all molded into the gun and their only purpose is to look good! The overall weight is rather light too since most of this pistol is ABS or plastic.

Pros:

  • Good quality and cheap air gun suitable for beginners
  • 1:1 replica of the MAC-11 machine pistol
  • Full size drop out magazine that holds both CO2 and BBs
  • High capacity 39 round magazine
  • Built-in metal and steel retractable stock
  • Available in both 4.5 mm steel BB and 6 mm plastic airsoft versions

Cons:

  • Almost all ABS plastic
  • No blowback action
  • Trigger is kind of long and heavy
  • Not many working parts that are only molded into the gun

Comments: To be honest, when I first saw the box for the KWC MAC-11 M11 CO2 BB Gun I was a bit excited. That was, until I opened it up and found out I was looking at an almost all-plastic gun with few working parts and no blowback operation. But after holding it and giving this air pistol a good look over I have to say I am warming up to it a bit more now. After all, it 100% looks the part so if you are looking for a replica MAC-11 then this will fill that purpose. Even though it is almost all ABS plastic, this solid airgun is well made. The steel and metal stock are nice additions and for a low cost replica airsoft shooter you do get your money's worth.

SpecificationValue
Gun Caliber:4.5 mm (.177 cal)
Action:Semi-Automatic
Gun FPS Range:350 to 400
Ammo Type:Steel BB
Power Source:Co2
Trigger Action:Double
Body Type:UZI
Blowback Action:Non-Blowback
Gun Safety:Manual
Gun Front Sight:Post
Gun Rear Sight:Fixed
Material:Plastic (ABS)

Have you used this product?
Rate it now.


How are we doing? Give us feedback about this page.